Wednesday, May 24, 2017

How to Unlock Huawei MiFi Modem (E5573s-606 and E5573s-320) - MODEM UNLOCKING 101

The Tech Citadel
I had shared this tutorial sometime ago but I recently received an email from a reader who needed this, so I have decided to repost it.


MODEM UNLOCKING 101




Today's tutorial is on how to unlock  Huawei 4G MiFi with Model Number E5573s-320 and E5573s-606 MiFi modem. Spectranet and InterC Huawei Modem falls within this categories but I’ll urge you to check your MiFi Model very well before you try the below;

Unlocking your Huawei 4G MiFi router with E5573s-320 & E5573s-606 will give you room to use any 4G network sim like ntel, SMILE, Swift InterC etc…without any form of restriction.

Note: if your don’t have the specified Model stipulated above, just pretend like NFA and click on the next post.

Requirements:
>>Huawei Mobile Partner (if you don’t have it, download it here)
>>Latest HiLink Drivers (download it here)
>>Latest Huawei HiLink driver V5 (download it here)
>>Huawei E5573s-606 firmware version (download it here)
>>Huawei E5573s-320 firmware version (download it here)
>>Huawei code calculator (download it here)
>>Universal master code generator (download it here)
>>Make sure your Huawei MiFi Modem (Spectranet, InterC) is fully charged

Follow the Below steps to unlock your device.
Step 1: Unzip the Huawei hiLink drivers that you downloaded above and install them on your PC. Once your installation is complete, reboot your PC so that the drivers can be fully updated with your PC.
Step 2: Unzip and launch the universal master code generator, put in yourimei and click on generate
Step 3: Copy the flash code(to notepad) from the imei generated which will serve as your password
Step 4: Insert an unsupported sim into your Huawei E5573s-606 or E5573s-320 router and connect it to your PC via USB cable.

Step 5: Unzip the Huawei E5573s-606 firmware you downloaded and go to the folder where “Prod&Serv&Cust”, run the file P711S-E5-update_21.110.99.03.00.exe

Step 6: It will request for password, input the flash code you copied to your notepad as password and hit the ok button. Wait for the installation to finish. At this point, do not disconnect your usb cable, your PC must not shot down or otherwise.
Step 7: Once the process has been successfully completed, extract and launch Huawei code calculator
Step 8: Click on the read tab to generate your unlock code as will be display on the result field ()
Step 9: Unzip and open the second Huawei E5573s-320 firmware you downloaded earlier, run the E5573_Update_21.180.17.00.00.exe.
It will update your router firmware and drivers will be installed accordingly. 

Step 10: Once the update is complete, go to your Huawei mobile partner interface, settings select network settings, and pop up to insert your unlock code will appear.

Step 11: Enter the unlock code you generated in step 8 and your Huawei mifi router will be unlocked.
With this, you can rock any 4G network chip in your MiFi router.

No comments:

Post a Comment

Drop your comments

Download Our Android App → CLICK HERE